ALC-709 1oz. Bottle Candy Electric Blue Enamel
For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze.Apply one of these primers before using Regular ALCLAD: Tamiya Plastic Primers-white or grey Auto Primer-white or grey Future/Klear -floor sealer/polishPlastic primers and auto primers should be lightly polished with 1000/1200 wet & dry paper to give a less absorbent glossy surface .ALCLAD High Shine -Chrome and Polished Aluminium both require a dark glossy base. Polished Aluminium should be used over Tamiya TS-14 gloss black,or gloss black auto paint. Chrome and only chrome should be used over gloss black model enamel paint.SPRAYING: ALCLAD should be sprayed at 15-20psi. Spray 1 ½ -2 ½ inches away from the model. Use the airbrush like a paint brush not an aerosol. Buffing is not necessary-though tonal variation can be made by polishing selected panels with micromesh. A sealer is not required. Regular ALCLAD can be masked and over painted Decal solutions can be used with Regular ALCLAD,but are not recommended for Chrome or Polished Aluminium.
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
It is an amazing color and quality product. Despite the bottle saying there was no need to thin the product, I found it to need to be thinned at about 7 to 1 to shoot perfect from my brush using .035 needle at 20 psi. It’s just too bad they don’t sell this in quart size containers so I could paint my vehicle in this color.
Alclad paints are really good they come airbrush ready, easy to clean too, and they apply smoothly.
Awesome clear paint to be applied over a metallic base. Easy to clean and airbrush ready.
is added to your shopping cart
You must be logged in to manage your wishlist.